
Struck-by incidents: 17% of construction fatalities, NIOSH says
NIOSH data cited at a CPWR webinar showed struck-by incidents accounted for 17% of construction fatalities and 21.5% of nonfatal injuries between 2011 and 2021.
- Section
- Construction
- Author
- By Amara Osei
- Filed
- Length
- 3 min read
Key takeaways
- Struck-by incidents made up about 17% of construction fatalities and 21.5% of nonfatal injuries from 2011 to 2021, NIOSH said.
- BLS classified 161 of 1,034 construction fatalities as contact incidents and 244 as transportation incidents in 2024.
- CPWR hosted a Nov. 4 webinar about creating a “sphere of safety” for construction workers.
- Sundt uses autonomous pile drivers with cameras and collision-avoidance technology on solar projects.
- United Cleanup of Oak Ridge workers can earn a recognition coin for calling a halt to work.
By Amara Osei
Struck-by incidents accounted for about 17% of construction fatalities and 21.5% of nonfatal injuries between 2011 and 2021, according to the National Institute for Occupational Safety and Health.
At a Nov. 4 webinar hosted by CPWR — The Center for Construction Research and Training — panelists said contractors can prevent struck-by injuries by creating a “sphere of safety.” The approach protects workers from falling or swinging objects and calls for crews to reassess those risks as shifts change.
Federal data make the count less tidy. The Bureau of Labor Statistics groups struck-by deaths within broader contact and transportation categories. In 2024, the most recent data available, BLS classified 161 of the industry’s 1,034 fatalities as contact incidents and 244 as transportation incidents. Those BLS figures are not standalone struck-by totals.
What does a “sphere of safety” include?
The method looks beyond the immediate task to loose material on the floor above, a machine’s blind spots and a load that could shift on the far side of a trailer. Each can turn work into a struck-by hazard even when the crew appears tidy and organized. A neat stack, in other words, is not a safety certificate.
Travis Weber, senior director of environmental, health and safety at Centennial, Colorado-based Haselden Construction, said:
“Just because things are neatly stacked doesn’t necessarily mean they can’t fall over.”
Weber recommended:
- tethering tools;
- covering openings or installing debris netting;
- securing stored materials against wind; and
- keeping workers clear of the far side of a trailer during unloading.
Those practices form part of Associated General Contractors of Colorado’s Stop the Drop campaign.
How can crews separate people from moving equipment?
On a Texas data center project with DPR Construction, Sundt Construction set up portable barriers to keep vehicles away from workers entering and leaving a lunch tent, according to Reese Fortin, Sundt’s district health, safety and environment manager. Fortin also described using fencing to mark pedestrian routes and clips to secure drywall to framing when sheets must be stored upright.
On solar projects, Fortin said, Sundt uses autonomous pile drivers fitted with cameras and collision avoidance technology designed to stop the equipment if someone enters its operating zone. She recommended marking robotic work areas with flagging and signs, then putting up fencing where conditions warrant it.
Keeping workers clear of moving equipment starts with an internal traffic control plan, said Travis Parsons, director of occupational safety and health at the Laborers’ Health and Safety Fund of North America.
“Sketch where workers, delivery trucks and equipment will go, identify crossings and eliminate backing where possible,” Parsons said. “Use signs to mark routes and brief subcontractors and drivers when the layout changes.”
Put plainly, it works like a traffic map: workers, delivery trucks and equipment occupy marked routes, with crossings identified and backing eliminated where possible.
Why do spotters and stop-work authority matter?
Jay Hocutt, a heavy equipment program manager at Oak Ridge, Tennessee-based environmental contractor United Cleanup of Oak Ridge, said operators and trained spotters should walk the route together before a move. They should identify blind spots and agree on how they will signal a stop. Hocutt favors radios, allowing spotters to remain farther from moving equipment.
His operating rule is blunt: if communication drops or someone unexpectedly enters the work zone, stop. Hocutt also said crews should revisit the need for a spotter at every briefing and whenever conditions change. At United Cleanup of Oak Ridge, workers who call a halt can earn a recognition coin. Hocutt said the company celebrates those stops because it wants workers to stop work.
The next shift is the checkpoint: crews must review routes, recheck blind spots and reconsider whether a spotter is necessary before equipment moves. The sphere only works if its boundary changes with the work.
Source: Construction Dive
More from Amara Osei
Show full bio
Market editor covering companies, deals and strategy in construction industry, architecture, interior design at Built Current.
354 articles

