This Rocking Chair Has A Built-in Subwoofer That Immerses Your Body In Audio + Lights
This Rocking Chair Has A Built-in Subwoofer That Immerses Your Body In Audio + LightsErikaWittlieb / pixabay

Interiors

Eunseo Yun’s Plunge Chair puts a subwoofer inside a rocker

Eunseo Yun’s full-scale Plunge Chair prototype combines a Panton-like shell, bass shaker, body-routed frequencies and color-changing lights. It has no price or release date.

Section
Interiors
Author
By Marcus Bennett
Filed
Length
4 min read

Key takeaways

  • Plunge Chair is a full-scale prototype assembled from roughly 16 3D-printed segments.
  • Yun proposes routing bass, cello and double bass toward the sitter’s hips and legs.
  • An app would vary the color, brightness and speed of lighting according to each track.
  • The concept earned a prize at Korea’s GaGu Living Design Competition, which has sought young designers since 2005.
  • No price or release plans are set for the personal project.

By Marcus Bennett

Eunseo Yun’s Plunge Chair exists as a full-scale prototype printed in roughly 16 segments, with no price or release plans.

Seoul-based designer Eunseo Yun wanted to “put that feeling into furniture”: the bodily impact of a concert rather than the isolated experience of listening through earbuds. His rocking lounger turns that aim into a proposal for hearing, feeling and seeing music.

What does the Plunge Chair physically do?

The prototype takes the form of one continuous, legless ribbon of shell in a single loud color. Its backrest drops into a broad dish, the S-curve tightens into a hairpin loop, and the base extends into a long rocker.

Yun proposes a bass shaker and internal sound chambers that make the shell a subwoofer around the sitter. Lighting changes with the track, moving from sunshine for bangers to blue for breakup songs.

Folding the S-curve back on itself creates an enclosed cavity that Panton never had. Yun treats that cavity as a speaker cabinet, while the deep recline brings the back, seat, thighs and arms into contact with the shell. That geometry gives the sitter more area to receive vibration.

The concept earned a prize at Korea’s GaGu Living Design Competition, which has sought young furniture designers since 2005.

Why does the Panton connection matter?

Verner Panton spent the better part of a decade pursuing a stackable cantilever chair molded from one piece of plastic. Vitra launched it in 1967 with a pilot run of 150 units in glass-fiber-reinforced polyester.

Buyers called it the free swinger for the subtle flex in its seat. Panton held sitters upright at a dining table; Plunge lowers and reclines its occupant, converting Panton’s flex into motion as the flared foot unrolls into a full rocker.

That change alters how the shell meets the body. Its narrow rocker has only a small ground contact, however, and the proposal does not establish how much vibration reaches the sitter rather than the ceiling below.

How would Plunge route sound through the body?

Most tactile-audio products concentrate on low-frequency rumble. A Dayton bass shaker bolts beneath a couch, a SubPac straps to a studio chair, and Pinju Chen’s Speaker Chair places a larger speaker in its base.

Yun’s proposal divides a track into separate instrumental layers, including vocals, guitar and bass, then assigns each layer to a different area of the body. The bass route receives the most detail: Yun sends bass, cello and double bass through the shaker and shell chambers toward the hips and legs.

Trueba Studio’s VIBRYX collection follows the same broad premise with speaker-filled sofa bases. Plunge extends that approach by turning the entire shell into the speaker enclosure.

What does the lighting system add?

A 2013 UC Berkeley study found that people associate fast, major-key music with lighter, brighter and yellower colors, while slow, minor-key music prompts darker, grayer blues. An app would apply that association to each track by changing color, brightness and speed, shifting the room from sunshine to sea blue.

Jaewon Choi’s speaker stool keeps its visuals on a phone screen; Plunge’s renders wash the surrounding room in color. The proposal also extends Panton’s 1970 Visiona 2 installation for Bayer, built aboard a riverboat for the Cologne Furniture Fair, which gave a room both sound and color atmosphere.

Plunge compresses that multiroom concept into one seat in the year Panton would have turned 100.

How was the prototype made?

Yun tested the pose on a row of hand-sized white models, adjusting how tightly the loop curled and how far the seat tilted. He modeled the full-size design in Rhino, rendered it in KeyShot, and 3D-printed it in roughly 16 segments.

Wooden dowels pinned the sections together, and Yun filled the seams and sprayed the shell in a paint booth. The result has a red-orange finish. Panton built his first full-scale model in 1958, while Eero Aarnio tested the 1967 Pastil Chair with a polystyrene prototype.

The renders add chartreuse, purple and black to the red-orange prototype. Those three colors match the hearing, sight and touch circles in Yun’s own branding.

What must happen before it becomes a product?

Norwegian educator Olav Skille built a vibroacoustic chair in the early 1980s using low frequencies from 30 to 120 Hz, originally for children with severe disabilities. Yun moves that technology from a clinical setting toward private entertainment, adding full-body rocking and synchronized lighting.

Plunge remains a personal project and a full-scale prototype. Yanko Design’s account says the GaGu jury agreed “the idea has legs,” but no vibration measurements, price or release schedule accompanies the award.

Panton stood still for sixty years. Plunge needs verified vibration levels, practical sound isolation and a development plan before the rocking shell can leave the prototype stage.

Source: Yanko Design

furniture-design vibroacoustics immersive-audio 3d-printing responsive-lighting

Share this article:

More from Marcus Bennett

Marcus Bennett

Show full bio

Correspondent covering money, funding and market shifts around construction industry, architecture, interior design at Built Current.

374 articles

More projects

« Previous articleNext article »